Reseller Information Retail price: 119,95€ inkl. 19% VAT / $ 119,95 EC-ID: 00946-16-00015Media bundle Download   Prime That means the original Kayfun experience meats modern day. The Kayfun Prime is a pure “mouth to lung” atomizer. It inherits the functionality and design language of the Kayfun 5, but the inner life has been completely redesigned and tuned specifically for MTL vaping. Airflow Control   The Kayfun Prime offers an Airflow Control, that is externally adjustable in 6 increments from 1mm to 2mm airflow. Liquid Control and filling. The Kayfun Prime gives you the option to restrict or close off the liquid flow completely, by turning the tank clockwise. At the fully closed position, you can open the topcap to conveniently fill the tank from the top through the large fill port. An air pocket in the topcap prevents spillage, if the tank is filled beyond the maximum and ensures and optimal liquid flow. Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil. Build Deck and evaporation chamber The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eleminate temperature spikes and therefore create a better flavor profile. With the build deck the evaporation chamber has shrunk too, to condense the vapor and give you a rich and flavourful experience, even at lower wattages.    Technical features Anti heat driptip with POM inlay (engraved) Top filling Borosilicate glass  Liquid control (fully adjustable)  PEEK insulator  External airflow control  316L stainless steel  510 connector  Serialnumber for authentication Easy assembly and maintenance  Measurements Diameter: 22mm Height: 45,5mm (without mouthpiece) Tank capacity: 2ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Borosilicate Glass Insulators PEEK, POM-C O-rings NBR 70    Scope of delivery:  1 Kayfun Prime with engraved steel tank* 1 glass tank 1 spare kit  

Disclaimer: Blasted surfaces may appear differently in different light condition. Product may vary (slightly) from the product pictures. Processed and coated surfaces are sensitive to scratches and therefore not included in the warranty. Handle with care. Reseller Information This special edition of the Kayfun Prime comes in 6 different version. Each individual version goes through a different surface treatment. With all 6 versions, all current carrying parts are gold plated. Please notice: Due to the high labor intensity, this is not a product that can be manufactured in large quantities. All orders will be commissioned production and shipped as soon as they are finished with an expected delivery time of 3 weeks.  Retail price:  Version EURO USD Moonlight 149,95€ inkl. 19% VAT $149,95 Midnight 149,95€ inkl. 19% VAT $149,95 High Noon 169,95€ inkl. 19% VAT $169,95 Starlight 169,95€ inkl. 19% VAT $169,95 Twilight 169,95€ inkl. 19% VAT $169,95 Sunrise 169,95€ inkl. 19% VAT $169,95   EC-ID:  00946-16-00015 Prime That means the original Kayfun experience meats modern day. The Kayfun Prime is a pure “mouth to lung” atomizer. It inherits the functionality and design language of the Kayfun 5, but the inner life has been completely redesigned and tuned specifically for MTL vaping. Airflow Control   The Kayfun Prime offers an Airflow Control, that is externally adjustable in 6 increments from 1mm to 2mm airflow. Liquid Control and filling. The Kayfun Prime gives you the option to restrict or close off the liquid flow completely, by turning the tank clockwise. At the fully closed position, you can open the topcap to conveniently fill the tank from the top through the large fill port. An air pocket in the topcap prevents spillage, if the tank is filled beyond the maximum and ensures and optimal liquid flow. Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil. Build Deck and evaporation chamber The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eleminate temperature spikes and therefore create a better flavor profile. With the build deck the evaporation chamber has shrunk too, to condense the vapor and give you a rich and flavourful experience, even at lower wattages.    Technical features Anti heat driptip with POM inlay (engraved) Top filling Borosilicate glass  Liquid control (fully adjustable)  PEEK insulator  External airflow control  316L stainless steel  510 connector  Serialnumber for authentication Easy assembly and maintenance  Measurements Diameter: 22mm Height: 45,5mm (without mouthpiece) Tank capacity: 2ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Borosilicate Glass Insulators PEEK, POM-C O-rings NBR 70    Scope of delivery:  1 Kayfun Prime with engraved steel tank* 1 glass tank 1 spare kit  

Photos and MEDIA now available Download Media for commercial use here Recommended retail price: EU: 89,95€ inkl. VAT (£74.95) International:  $89,95  Description The Kayfun Mini V3 combines simplicity, functionality and excellent performance in a very compact form factor. With 19mm in diameter it makes an elegant appearance on small as well as on medium sized mods. A fully adjustable liquid control gives you full control over your liquid flow, however, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun Mini V3 can easily be filled through the top within a couple of seconds. Just as simple as filling it, is accessing your coil by removing the tank, regardless if it’s filled or not. Regardless of the small form factor the build deck offers you plenty of space to mount your build. The internal design of the evaporation chamber has been heavily inspired by its ancestor, the Kayfun Mini 2.1, to create the outstanding flavor profile, Kayfun fans have grown to love. At the same time SvoëMesto has increased the adjustable airflow from 1,5mm to 2,2mm, giving the Kayfun Mini V3 much larger performance capabilities. The Kayfun Mini V3 is made from the same high class materials as the Kayfun 4. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required. It’s functionality, intuitive handling and rich flavor profile combined in a small form factor makes the Kayfun Mini V3 a true daily driver.   Technical features Fully adjustable liquid flow control Topfill Airflow control Glass tank Easy coil access Easy cleaning and maintenance Serial number and product key for product authentification Measurements Diameter: 19mm Height: 58mm (without mouthpiece) Tank capacity: 2ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Borosilicate glass Insulators POM-C O-rings NBR 70    Scope of delivery: 1 Kayfun Mini V3 1 spare kit 1 user manual   Additional information: The Kayfun Mini V3 was designed for vapers that newly start rebuilding as well as experienced users, who want an intuitive and reliable experience. Testing has shown that, in contrast to its ancestor, it is quite tolerant against user mistakes and not very likely to gurgle, leak or burn the wick. Especially for beginners the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Teflon coated o-rings assure a smooth operation without threads getting stuck. Due to its internal construction an outstanding vape experience can be achieved with very little effort. Additionally, the 316L stainless steel used is a high quality material, that can be found in the dental and medical technology sector. It’s a very hard and durable steel, which is not easily damaged or scratched.

Recommended retail price: EU: 79,95€ inkl. VAT International:  $79,95  Description The Kayfun 5 follows a similar design pattern as his little brother, combining simplicity, functionality and outstanding performance. A fully adjustable liquid control gives you full control over your liquid flow, however, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun 5 can easily be filled through the top within a couple of seconds. Just as simple as filling it, is accessing your coil by removing the tank, regardless if it’s filled or not. The build deck has been heavily modified to make building coils easier for beginners and more versatile for enthusiasts.  At the same time SvoëMesto has increased the adjustable airflow from 2,2mm to 3,2mm providing more than twice the airflow compared to the Kayfun 4. The airflow control can now be adjusted externally and has 4 positions: 1,8mm (Kayfun Lite plus) 2,2mm (Kayfun 4) 2,7mm (Kayfun 4S) 3,2mm (maximum airflow)  The internal design of the evaporation chamber has been optimized to create an outstanding flavor profile, Kayfun fans have grown to love, even at higher airflow settings. The Kayfun 5 is made from the same high class materials as the Kayfun Mini V3. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required. It’s functionality, intuitive handling and rich flavor profile combined with great performance capabilities makes the Kayfun 5 a true daily driver.   Technical features Anti heat driptip with POM inlay (engraved) Top filling Quartz glass  Liquid control (fully adjustable)  enlarged build deck -> comfort building  M2 build screws  PEEK insulator  Increased maximum liquid flow External airflow control  Increased maximum airflow  316L stainless steel  510 connector  Serialnumber for authentication Easy assembly and maintenance  Measurements Diameter: 22mm Height: 60mm (without mouthpiece) Tank capacity: glass tank ~4ml, steel tank ~5ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Quartz Glass Insulators PEEK, POM-C O-rings NBR 70    Scope of delivery: 1 Kayfun 5 with engraved steeltank 1 glass tank 1 spare kit 1 user manual   Additional information: The Kayfun 5 was designed for vapers that newly start rebuilding as well as experienced users, who want an intuitive and reliable experience and a platform to experiment on. Testing has shown that it is quite tolerant against user mistakes and not very likely to gurgle, leak or burn the wick. Especially for beginners the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Due to its internal construction an outstanding vape experience can be achieved with very little effort.  Additionally, the 316L stainless steel used is a high quality material, that can be found in the dental and medical technology sector. It’s a very hard and durable steel, which is not easily damaged or scratched.