Kayfun 5S

The prices will only be displayed after registration and activation.

Product number: X_10700.1.000

Product information "Kayfun 5S"

2ml version of the Kayfun 5.

The Kayfun 5S is identical to the Kayfun 5, with the exception of a 10mm shorter tank and chimney to reduce to tank capacity to 2ml. This product has primarily been made for (European) countries in which (TPD) regulations require that the tank capacity must not exceed 2ml.

Recommended retail price:

EU:
119,95€ inkl. VAT (£94.95)

International:
$119,95

Description

The Kayfun 5 follows a similar design pattern as his little brother, combining simplicity, functionality and outstanding performance. A fully adjustable liquid control gives you full control over your liquid flow, however, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun 5 can easily be filled through the top within a couple of seconds. Just as simple as filling it, is accessing your coil by removing the tank, regardless if it’s filled or not. The build deck has been heavily modified to make building coils easier for beginners and more versatile for enthusiasts. At the same time SvoëMesto has increased the adjustable airflow from 2,2mm to 3,2mm providing more than twice the airflow compared to the Kayfun 4.
The airflow control can now be adjusted externally and has 4 positions:

1,8mm (Kayfun Lite plus)
2,2mm (Kayfun 4)
2,7mm (Kayfun 4S)
3,2mm (maximum airflow)

The internal design of the evaporation chamber has been optimized to create an outstanding flavor profile, Kayfun fans have grown to love, even at higher airflow settings.

The Kayfun Mini 5 is made from the same high class materials as the Kayfun Mini V3. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required.
It’s functionality, intuitive handling and rich flavor profile combined with great performance capabilities makes the Kayfun Mini 5 a true daily driver.

Technical features

Anti heat driptip with POM inlay (engraved)
Top filling
Quartz glass
Liquid control (fully adjustable)
enlarged build deck -> comfort building
M2 build screws
PEEK insulator
Increased maximum liquid flow
External airflow control
Increased maximum airflow
316L stainless steel
510 connector
Serialnumber for authentication
Easy assembly and maintenance

Measurements

Diameter: 22mm
Height: 50mm (without mouthpiece)
Tank capacity: glass tank 2ml, steel tank ~2ml

Materials:

Component	Material
Stainless steel components	WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A)
Glass tank	Quartz Glass
Insulators	PEEK, POM-C
O-rings	NBR 70

Scope of delivery:

1 Kayfun 5S with engraved steeltank
1 glass tank
1 spare kit
1 user manual

Additional information:

The Kayfun 5 was designed for vapers that newly start rebuilding as well as experienced users, who want an intuitive and reliable experience and a platform to experiment on. Testing has shown that it is quite tolerant against user mistakes and not very likely to gurgle, leak or burn the wick. Especially for beginners the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Due to its internal construction an outstanding vape experience can be achieved with very little effort.
Additionally, the 316L stainless steel used is a high quality material, that can be found in the dental and medical technology sector. It’s a very hard and durable steel, which is not easily damaged or scratched.

Accessory Items

K5S kit (for K5)

A conversion kit for the Kayfun 5 that reduces its height by 5mm, which gives the atomizer a more slick and compact form factor. Tank capacity reduced to ~ 2.5ml. Reseller information MRP: 19,95€ inkl. 19% tax / $19,95 Materials: 316L stainless steel, borosilicate glass. Scope of delivery: 1x K5S evaporation chamber 1x K5S spare glass

Details

K5 - Spare Kit

Reseller information MOQ - none, but highly recommended to have in stock Scope of delivery: 2 regular builddeck screws 2 long builddeck screws all o-rings

Details

510 insulator (universal)

Set of 3 POM 510 Insulator for: Kayfun Mini V3 Kayfun 5 / 5S / 5² Kayfun Prime / Prime SE Kayfun 5²/ Kayfun 5² SE

Details

K5S - spare glass

Reseller information MOQ none - highly recommended to have in stock RRP: 6,68€ + tax ($7,95) Material: Quartz glass

Details

SM - Driptip - Base

MRP: 5,95€ incl. tax ($5.95) The SM - Drip Tip - Base available in two different sizes for either: Kayfun 5/ Kayfun Prime (slim) Kayfun 5² (wide) Has to be combined with matching POM tip. 510 standard with dual o-rings.

Details

K5 - Spare Centerpin

MRP: 9,95€ incl. tax ($9.95)

Details

K5 - Insulators Kit

K5 - insulators kit including all 3 insulators. MRP: 8,49€ incl. tax ($8.49)

Details

K5 - MTL Kit

Reseller information MOQ none - highly recommended to have in stock Available from Friday June 17th 2016 RRP: 8,36€ + tax ($9,95) The K5 MTL Kit includes 3 tubes with inner diameters of 1.2 mm 1.4mm 1.6mm These tubes are inserted from above into the centerpost to restrict the airflow. Material: 316L stainless steel

Details

K5/ Prime - Drip Tip - POM tip

This POM tip screws into the K5 - Drip Tip - Base . Together they form a modular Drip Tip. The POM tip is currently available in a medium and a long size as well as 2 colors. MNRP for the POM tip: 4,95€ incl. tax. ($4.95).

Details

Similar Items

PRIME SPECIAL EDITION

Disclaimer: Blasted surfaces may appear differently in different light condition. Product may vary (slightly) from the product pictures. Processed and coated surfaces are sensitive to scratches and therefore not included in the warranty. Handle with care. Reseller Information This special edition of the Kayfun Prime comes in 6 different version. Each individual version goes through a different surface treatment. With all 6 versions, all current carrying parts are gold plated. Please notice: Due to the high labor intensity, this is not a product that can be manufactured in large quantities. All orders will be commissioned production and shipped as soon as they are finished with an expected delivery time of 3 weeks. Retail price: Version EURO USD Moonlight 149,95€ inkl. 19% VAT $149,95 Midnight 149,95€ inkl. 19% VAT $149,95 High Noon 169,95€ inkl. 19% VAT $169,95 Starlight 169,95€ inkl. 19% VAT $169,95 Twilight 169,95€ inkl. 19% VAT $169,95 Sunrise 169,95€ inkl. 19% VAT $169,95 EC-ID: 00946-16-00015 Prime That means the original Kayfun experience meats modern day. The Kayfun Prime is a pure “mouth to lung” atomizer. It inherits the functionality and design language of the Kayfun 5, but the inner life has been completely redesigned and tuned specifically for MTL vaping. Airflow Control The Kayfun Prime offers an Airflow Control, that is externally adjustable in 6 increments from 1mm to 2mm airflow. Liquid Control and filling. The Kayfun Prime gives you the option to restrict or close off the liquid flow completely, by turning the tank clockwise. At the fully closed position, you can open the topcap to conveniently fill the tank from the top through the large fill port. An air pocket in the topcap prevents spillage, if the tank is filled beyond the maximum and ensures and optimal liquid flow. Two full turns open the liquid control completely. Thanks to SvoëMesto's unique pressure based feeding system, this setting works for most builds, as it automatically feeds the right amount of e-liquid to your coil. Build Deck and evaporation chamber The build deck has been sized to accommodate smaller builds that are typical for MTL use. The new air outlet distributes the available air stream over the entire length of the coil to eleminate temperature spikes and therefore create a better flavor profile. With the build deck the evaporation chamber has shrunk too, to condense the vapor and give you a rich and flavourful experience, even at lower wattages. Technical features Anti heat driptip with POM inlay (engraved) Top filling Borosilicate glass Liquid control (fully adjustable) PEEK insulator External airflow control 316L stainless steel 510 connector Serialnumber for authentication Easy assembly and maintenance Measurements Diameter: 22mm Height: 45,5mm (without mouthpiece) Tank capacity: 2ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Borosilicate Glass Insulators PEEK, POM-C O-rings NBR 70 Scope of delivery: 1 Kayfun Prime with engraved steel tank* 1 glass tank 1 spare kit

Details

Kayfun Mini V3

Photos and MEDIA now available Download Media for commercial use here Recommended retail price: EU: 89,95€ inkl. VAT (£74.95) International: $89,95 Description The Kayfun Mini V3 combines simplicity, functionality and excellent performance in a very compact form factor. With 19mm in diameter it makes an elegant appearance on small as well as on medium sized mods. A fully adjustable liquid control gives you full control over your liquid flow, however, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun Mini V3 can easily be filled through the top within a couple of seconds. Just as simple as filling it, is accessing your coil by removing the tank, regardless if it’s filled or not. Regardless of the small form factor the build deck offers you plenty of space to mount your build. The internal design of the evaporation chamber has been heavily inspired by its ancestor, the Kayfun Mini 2.1, to create the outstanding flavor profile, Kayfun fans have grown to love. At the same time SvoëMesto has increased the adjustable airflow from 1,5mm to 2,2mm, giving the Kayfun Mini V3 much larger performance capabilities. The Kayfun Mini V3 is made from the same high class materials as the Kayfun 4. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required. It’s functionality, intuitive handling and rich flavor profile combined in a small form factor makes the Kayfun Mini V3 a true daily driver. Technical features Fully adjustable liquid flow control Topfill Airflow control Glass tank Easy coil access Easy cleaning and maintenance Serial number and product key for product authentification Measurements Diameter: 19mm Height: 58mm (without mouthpiece) Tank capacity: 2ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Borosilicate glass Insulators POM-C O-rings NBR 70 Scope of delivery: 1 Kayfun Mini V3 1 spare kit 1 user manual Additional information: The Kayfun Mini V3 was designed for vapers that newly start rebuilding as well as experienced users, who want an intuitive and reliable experience. Testing has shown that, in contrast to its ancestor, it is quite tolerant against user mistakes and not very likely to gurgle, leak or burn the wick. Especially for beginners the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Teflon coated o-rings assure a smooth operation without threads getting stuck. Due to its internal construction an outstanding vape experience can be achieved with very little effort. Additionally, the 316L stainless steel used is a high quality material, that can be found in the dental and medical technology sector. It’s a very hard and durable steel, which is not easily damaged or scratched.

Details

Kayfun 5

Recommended retail price: EU: 79,95€ inkl. VAT International: $79,95 Description The Kayfun 5 follows a similar design pattern as his little brother, combining simplicity, functionality and outstanding performance. A fully adjustable liquid control gives you full control over your liquid flow, however, thanks to SvoëMesto’s pressure based feeding system, fine tuning is not required with the majority of setups. After closing the liquid control, the Kayfun 5 can easily be filled through the top within a couple of seconds. Just as simple as filling it, is accessing your coil by removing the tank, regardless if it’s filled or not. The build deck has been heavily modified to make building coils easier for beginners and more versatile for enthusiasts. At the same time SvoëMesto has increased the adjustable airflow from 2,2mm to 3,2mm providing more than twice the airflow compared to the Kayfun 4. The airflow control can now be adjusted externally and has 4 positions: 1,8mm (Kayfun Lite plus) 2,2mm (Kayfun 4) 2,7mm (Kayfun 4S) 3,2mm (maximum airflow) The internal design of the evaporation chamber has been optimized to create an outstanding flavor profile, Kayfun fans have grown to love, even at higher airflow settings. The Kayfun 5 is made from the same high class materials as the Kayfun Mini V3. Thanks to its intelligent design, cleaning and maintenance can be done by disassembling the atomizer into no more than five pieces, no tools required. It’s functionality, intuitive handling and rich flavor profile combined with great performance capabilities makes the Kayfun 5 a true daily driver. Technical features Anti heat driptip with POM inlay (engraved) Top filling Quartz glass Liquid control (fully adjustable) enlarged build deck -> comfort building M2 build screws PEEK insulator Increased maximum liquid flow External airflow control Increased maximum airflow 316L stainless steel 510 connector Serialnumber for authentication Easy assembly and maintenance Measurements Diameter: 22mm Height: 60mm (without mouthpiece) Tank capacity: glass tank ~4ml, steel tank ~5ml Materials: Component Material Stainless steel components WNr. 1.4404 (X2CrNiMo17-12-2), AISI 316L, (V4A) Glass tank Quartz Glass Insulators PEEK, POM-C O-rings NBR 70 Scope of delivery: 1 Kayfun 5 with engraved steeltank 1 glass tank 1 spare kit 1 user manual Additional information: The Kayfun 5 was designed for vapers that newly start rebuilding as well as experienced users, who want an intuitive and reliable experience and a platform to experiment on. Testing has shown that it is quite tolerant against user mistakes and not very likely to gurgle, leak or burn the wick. Especially for beginners the ability to access the build deck at any given time provides a perfect environment to practice and master rebuilding a Kayfun. Due to its internal construction an outstanding vape experience can be achieved with very little effort. Additionally, the 316L stainless steel used is a high quality material, that can be found in the dental and medical technology sector. It’s a very hard and durable steel, which is not easily damaged or scratched.

Details